CLI SNMP Admintrator software Release Notes: As of 6/11/08 This is a cumulative release notice for all versions, which have been released to CLI QA since version 2.0-194.7 was released. Most of these versions were not generally released and represent incremental fixes or enhancements to code. ***************************************************************** -Recommended to work on PC running Windows 2000 or newer operating systems. -2.0-195.8 Not supported on Windows NT -2.0-194.7 is supported on Windows NT -Minimum PC CPU should be Pentium (not Celeron) 1.7 GHz or higher for best performance. ***************************************************************** 5/26/08 SNMPAdm v2.0.195.8 (released version) -Fix 'Remote Setting" .REG file import bug on version 195.1-195.7 -Change remote image path xpe default value to "/dev/hda", image timeout and connection timeout set to 100/100 -Use SNMPadm manual v2.13.3 as source for HELP -Minor spelling corection in New Remote Patch screen. -To enable Patch Management Check Permit "Patch Management' then restart SNMPadm. 5/10/08 SNMPAdm v2.0.195.7 (limited release) - The file snmpadm195.7.exe file will do complete install. - Places CLI license information on the screen, user must accept to continue - Next step is that it automatically adds the registry path - Makes a backup of the data folder - Extracts the registry file, and the setup program to c:\program files\snmpadm\data folder - Then auto executes the setup program 4/3/08 SNMPAdm v2.0.195.6 (not released) - Change auto checkin timeing: wait 20 seconds and do SNMP request(5 times * 6 seconds timeout = 50 seconds),  the early version did SNMP request 3 times * 6 seconds timeout, so if the SAgent startup slowly, it will remove clients window on Server. - Multi-monitor, if drag any window to secondary monitor, close the SNMP (on primary monitor), restart the SNMP, it should be on primary monitor, but it shows on secondary monitor - Do an interval time 2 seconds on press F5 (no release), on early version, there was no interval time when press F5 do refresh clients - Fix cpu 100% when do patch manager(auto checkin and wait to send patch) 3/26/08 SNMPAdm v2.0.195.5 (not released) - If there is one or more patches needed to send, a yellow exclamation mark icon "!" will appear on Firmware Version column - A non zero exit code means failed, it will send to server, and show exit code on patch node in the right patches pane - When server finds a non zero exit code on patch, the patch will be sent again. When the patch fails more than 3 times, a red exclamation mark icon "!" will appear on Firmware Version, a red install count will be on  "Install Date Time" patches pane 3/15/08 SNMPAdm v2.0.195.4 (not released) - If there is need to patch, there will be one ! in the firmware version column 3/14/08 SNMPAdm v2.0.195.3 (not released) - Change XPe Client Agent: XPeSAgent1.0.1.172.exe to support patch manager 3/2/08 SNMPAdm v2.0.195.2 (not released) - Patch Manager for Schedule or Manual - PatchInfo format for remote patch - Support return code check...Exit code set on it's key: hklm\software\maple\XPeSAgebt\SA_PATCH.INI 3/1/08 SNMPAdm v2.0.195.1 (not released) - Add Patch Management logic new feature - XPe Agent: XPeSAgent1.0.1.170.exe, unrar.dll, for client: upgrade the XPeSAgent to 170 and copy unrar.dll to \windows\system32 2/5/08 SNMPAdm v2.0.194.19 (not released) - Fix Group and subnet "Firmware Upgrade" can't disable when the 'Upgrade' permit wasn't enabled 2/4/08 SNMPAdm v2.0.194.18 (not released) - The SNMPAdm localize resource file extension is changed to .LV1, and the next localize resource file extension is .LV2, .LV3, ... it can avoid SNMPAdm using the incorrect version of resource library example: the old file name is changed to .JPN, like SNMPAdm.JPN the new file name is change to .LV1.JPN, like SNMPAdm.LV1.JPN 1/9/08 SNMPAdm v2.0.194.16 (not released) - Add 'Broadcast Community As Public' on system configurations; value=0 to disable, value=1 to enable. Disable if Community name not 'Public'. 12/31/07 SNMPAdm v2.0.194.15 (not released) - Add discovery client from database on 'Group' if press 'F5' - Fix the last search type didn't save on client window - Remove the hotkey ALT+'R' for 'Remote Display' or 'Registry Editor' and others - Add Ctrl+'N' or Enter on search field for search next 10/26/07 SNMPAdm v2.0.194.14 (not released) - Support mouse wheel on wince shadowing (Remote Display) need new WINCE version support E5514.7 - Fix wince shadowing (Remote Display) blank screen 10/19/07 vncviewerdll 3.7.0.1 (not released) - Fix can't change input method on mbcs XPe 9/21/07 SNMPAdm v2.0.194.13 (not released) - Fix refresh bug on group, not subnet - Fix checkout bug on group (not 'All' group) 9/17/07 SNMPAdm v2.0.194.12 (not released) - Fix send dbcs message lost characters 7/31/07 XPeSagent 1.0.1.164 (not released) - Fix show exception message box when device shutdown/reboot on build 1.0.1.163 7/17/07 SnmpAdm v2.0.194.11 (not released) - Fix 194.10 doesn't work on win2000 - Change get XPe image timeout from 30 seconds to 90 seconds - Fix put image bug (the cpu utilization would be 100%) when client interrupts the upgrade procedure 6/5/07 XPeSAgent 1.0.1.163 (not released) - Add VNC supports different port (not 5500), requires SnmpAdm 2.0.194.10 and VNC4 installed - Save IP Statistics (multi-fixed IP, submask, gateway and DNS), requires linux updated components 6/5/07 SnmpAdm v2.0.194.10 (not released) - Support external VNC viewer for XPe and Linux, the XPe or Linux client must have enable "Accept connect" checked - The built-in VNC viewer listen port can be assigned to other ports to change the port... - Hold the Left control key before open the "SNMPAdm Options" dialog and uncheck "Enable VNC Viewer on Listen Mode" 5/24/07 snmpAdm 2.0.194.9 (not released) - Wince shadowing support password protect, need wince version E5512.2 - Fix Remote Image/Logs no vertical scroll bar - Remove free UPD (SNMP) socket when idle (no discovery) - Fix Database Navigator garbage on some skins (Futurist green,...) - Disable memo background on some logs screens 5/4/07 SnmpAdm 2.0.194.8 (not released) - Fix memory leak - Fix wrong charset on japanese OS and japanese skin localize support (system menu, Open/Save Dialog,etc) - Fix "Remote Image Path" can't select on "Remote Image/New Image" dialog - Fix "Image File Name" can't select on "New Schedule/Advanced Schedule Params" dialog - Support all MSG command on 'WINCE Patch Command' - Fix select schedule and long response when schedule's logs too large - Fix upgrade image schedule didn't work after discovery and clients disappear (when client reboot) 3/7/07 SnmpAdm 2.0.194.7 (released version) - Fix refresh(F5) discover can't stop when all clients found (no new clients found) - Add WIN9X skin, support for other skins